Nasty - Crown Of Thorns 3D Silicone/Satin - Patch

Instruction Manual for Applying a Textile Transfer Preparation:

• Use a standard iron. Choosing the surface: Place the fabric on a fire-resistant surface. An ironing board is less suitable; instead, use a wooden board, for example, from the kitchen.


• Position the transfer: Place the transfer design at the desired position on the fabric.


• Cover: Cover the transfer with parchment paper to protect it.


• Ironing (front side): Press the transfer for about one minute with moderate pressure on the front side. Ironing (back side): Repeat the process on the back side of the fabric.


• Cooling down: Let the fabric cool down lying flat.


• Check the edges: Check if all the edges of the transfer are adhering well. If necessary, press again on those areas.


• First wash: Wait at least 24 hours before washing the fabric for the first time.